Active Campaign Remove Duplicate Emails

To begin developing an automation in ActiveCampaign, start with a “trigger.” There are a variety of methods you can activate an automation, consisting of: When a tag is added When a contact subscribes to a list When a contact sends a type E-commerce and on-site options (offered in the “Pro” plan) When the contact reaches a particular point in another automation.

From there, you can start constructing the actions in your automation. Some actions that are readily available in ActiveCampaign’s automations are: Send an e-mail Alert a staff member Wait conditions If/then conditionals Split traffic for screening Skip to other parts of the automation Track goals (The contact can skip to the objective’s location in the automation.) Start or end another automation, or end the existing automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Add and remove tags Add a note Lead scoring, SMS and site messages, and Facebook Custom-made Audience management are all “Pro” functions – Active Campaign Remove Duplicate Emails.

Contrast with ConvertKit‘s Automations, which are more restricted. On ConvertKit, you can set off an automation when: The contact sends a type The contact buys A tag is contributed to the contact A custom-made field is updated with a particular value From there, you can create Conditions, to check whether the contact has a particular tag or custom field value.

Active Campaign Remove Duplicate Emails

You can likewise create Occasions, which are a bit like ActiveCampaign’s Objectives, but without the reporting. You can track an Event when: A tag is added or gotten rid of The contact purchases A date happens A customized field is updated with a specific value You do not create e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The primary way I build my list is through an email course. ActiveCampaign makes it easy for me to build my e-mail course precisely how I want to build it. Lots of online marketers construct really easy e-mail series for their “e-mail courses.” A contact indications up, and after that that contact immediately starts getting lessons.

It was easy to develop with ActiveCampaign, however impossible when I was with MailChimp. I don’t do that technique. My e-mail course is by hand synced with this countdown timer on my website. You have to sign up by Friday night, and a new course starts each Monday early morning. When I initially tried this methodology, I was on MailChimp.

Active Campaign Remove Duplicate Emails

Here’s the automation I utilize to welcome new students to my Style Pitfalls course. There’s a few things going on here: The automation sends out all contacts a “welcome e-mail (Active Campaign Remove Duplicate Emails).” The automation verifies that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends a “pump up” e-mail to get the trainees all set for next week’s course, and encourage them to share it with friends.

The contact will start getting lessons the following Monday early morning. If it is Friday and after 7pm, the contact missed enrollment for next week’s class. They’ll get the pump up e-mail the following Friday morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I do not wish to send out the same e-mail to everyone on my list. I wish to send them the appropriate email for their level of engagement – Active Campaign Remove Duplicate Emails. Active Campaign Remove Duplicate Emails. Here’s the automation I use to promote an evergreen webinar: First it verifies that they have not currently bought the item I pitch in the webinar.

Active Campaign Remove Duplicate Emails

Then it sends out a series of emails to get them interested in the webinar, and to motivate them to sign up. If they register, they immediately hit the “Goal” toward the end of the webinar, and the automation ends. If they don’t register, they get added to an automation promoting a rebroadcast of the webinar. Active Campaign Remove Duplicate Emails.

This allows me to tailor my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam combination panel: I can add tags based upon whether the contact signed up, attended, missed out on, or based upon the length of time they remained in the webinar. These tags can then set off automations within ActiveCampaign.

It costs me cash, and it makes it more likely that my e-mails go to spam or Gmail’s promotions tab. People who don’t open my e-mails make it harder for other emails to get to individuals who really want them! The “Pro” strategy of ActiveCampaign has lead scoring integrated in.

Active Campaign Remove Duplicate Emails

Here’s an automation I received from ActiveCampaign’s library of automations, which I use to tell which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds new tags for 7 days, 30 days, 60 days, etc Each time they open an email, a different automation removes them from this automation, eliminates all of those tags, and starts this automation over again.

This automation can be overwhelming at initially, and this is among those cases where I wish ActiveCampaign had a more out-of-the-box option. However, because you can do anything with ActiveCampaign, sometimes you have to develop things from scratch. ActiveCampaign has an alternative to erase inactive subscribers, which I don’t suggest.

Some customers do not have actually tracking turned on, so their opens aren’t tape-recorded. Others still wish to be subscribed however have actually been hectic. Here’s my reactivation sequence: I send out one e-mail asking if they still want to be subscribed, and briefly explaining why I keep my e-mail list tidy. In one week, I send them another e-mail (if they already clicked on the verification link in the previous e-mail, they have actually currently been removed from the automation utilizing a separate automation) – Active Campaign Remove Duplicate Emails.

Active Campaign Remove Duplicate Emails

The automation then unsubscribes them. My e-mails likewise have a link to a form where they can enter their e-mail address to let me understand that they do not have tracking made it possible for. This form includes a tag that I utilize to filter those contacts out. Active Campaign Remove Duplicate Emails. I used to include this tag when they clicked on a link, however when people do not have tracking on, it makes those links not work so dependably! I just send a basic “do you still want my emails?” confirmation.

Active Campaign Remove Duplicate Emails

To begin building an automation in ActiveCampaign, begin with a “trigger.” There are a number of ways you can activate an automation, including: When a tag is added When a contact registers for a list When a contact submits a kind E-commerce and on-site choices (available in the “Pro” strategy) When the contact reaches a particular point in another automation.

From there, you can start developing the actions in your automation. Some actions that are available in ActiveCampaign’s automations are: Send out an e-mail Notify a team member Wait conditions If/then conditionals Split traffic for screening Skip to other parts of the automation Track objectives (The contact can skip to the objective’s location in the automation.) Start or end another automation, or end the current automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Add and eliminate tags Include a note Lead scoring, SMS and site messages, and Facebook Custom Audience management are all “Pro” features – Active Campaign Remove Duplicate Emails.

Contrast with ConvertKit‘s Automations, which are more minimal. On ConvertKit, you can trigger an automation when: The contact sends a type The contact makes a purchase A tag is included to the contact A customized field is updated with a certain worth From there, you can develop Conditions, to examine whether the contact has a certain tag or customized field worth.

Active Campaign Remove Duplicate Emails

You can likewise produce Occasions, which are a bit like ActiveCampaign’s Objectives, but without the reporting. You can track an Occasion when: A tag is included or eliminated The contact buys A date takes place A custom-made field is updated with a specific value You don’t develop e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The main method I build my list is through an email course. ActiveCampaign makes it simple for me to construct my email course exactly how I want to construct it. Numerous marketers construct really basic email sequences for their “e-mail courses.” A contact signs up, and then that contact immediately starts getting lessons.

It was simple to develop with ActiveCampaign, but impossible when I was with MailChimp. I do not do that approach. My e-mail course is manually synced with this countdown timer on my site. You need to register by Friday night, and a new course begins each Monday early morning. When I initially attempted this methodology, I was on MailChimp.

Active Campaign Remove Duplicate Emails

Here’s the automation I use to invite new students to my Style Pitfalls course. There’s a couple of things going on here: The automation sends all contacts a “welcome email (Active Campaign Remove Duplicate Emails).” The automation validates that it’s not Friday. If it’s not Friday, the automation waits until it is Friday. At 11am, it sends a “pump up” e-mail to get the trainees ready for next week’s course, and motivate them to share it with good friends.

The contact will begin getting lessons the following Monday early morning. If it is Friday and after 7pm, the contact missed registration for next week’s class. They’ll get the pump up email the following Friday morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I don’t wish to send out the exact same e-mail to every person on my list. I wish to send them the appropriate email for their level of engagement – Active Campaign Remove Duplicate Emails. Active Campaign Remove Duplicate Emails. Here’s the automation I use to promote an evergreen webinar: First it validates that they haven’t currently purchased the item I pitch in the webinar.

Active Campaign Remove Duplicate Emails

Then it sends out a series of e-mails to get them thinking about the webinar, and to encourage them to register. If they sign up, they instantly struck the “Objective” towards completion of the webinar, and the automation ends. If they don’t register, they get included to an automation promoting a rebroadcast of the webinar. Active Campaign Remove Duplicate Emails.

This enables me to tailor my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can add tags based upon whether the contact signed up, attended, missed, or based upon for how long they remained in the webinar. These tags can then set off automations within ActiveCampaign.

It costs me cash, and it makes it most likely that my emails go to spam or Gmail’s promos tab. People who do not open my emails make it harder for other e-mails to get to individuals who really desire them! The “Pro” strategy of ActiveCampaign has actually lead scoring constructed in.

Active Campaign Remove Duplicate Emails

Here’s an automation I got from ActiveCampaign’s library of automations, which I utilize to inform which contacts aren’t engaging with my emails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds brand-new tags for 7 days, thirty days, 60 days, etc Each time they open an e-mail, a separate automation removes them from this automation, removes all of those tags, and begins this automation over once again.

This automation can be overwhelming in the beginning, and this is one of those cases where I want ActiveCampaign had a more out-of-the-box option. But, since you can do anything with ActiveCampaign, sometimes you need to develop things from scratch. ActiveCampaign has an option to delete non-active subscribers, which I don’t advise.

Some customers do not have actually tracking switched on, so their opens aren’t recorded. Others still wish to be subscribed however have been busy. Here’s my reactivation sequence: I send one e-mail asking if they still wish to be subscribed, and briefly explaining why I keep my e-mail list tidy. In one week, I send them another email (if they already clicked the confirmation link in the previous email, they have actually already been gotten rid of from the automation using a separate automation) – Active Campaign Remove Duplicate Emails.

Active Campaign Remove Duplicate Emails

The automation then unsubscribes them. My e-mails also have a link to a type where they can enter their email address to let me understand that they do not have tracking made it possible for. This type includes a tag that I use to filter those contacts out. Active Campaign Remove Duplicate Emails. I used to include this tag when they clicked on a link, however when individuals do not have tracking on, it makes those links not work so reliably! I only send an easy “do you still want my emails?” verification.