Active Campaign View My Sent Emails

Active Campaign View My Sent Emails

Active Campaign View My Sent EmailsActive Campaign View My Sent Emails

To begin constructing an automation in ActiveCampaign, begin with a “trigger.” There are a variety of methods you can set off an automation, consisting of: When a tag is included When a contact signs up for a list When a contact submits a kind E-commerce and on-site choices (readily available in the “Pro” strategy) When the contact reaches a specific point in another automation.

From there, you can start developing the actions in your automation. Some actions that are available in ActiveCampaign’s automations are: Send an e-mail Notify an employee Wait conditions If/then conditionals Split traffic for screening Avoid to other parts of the automation Track objectives (The contact can skip to the goal’s location in the automation.) Start or end another automation, or end the present automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Add and remove tags Add a note Lead scoring, SMS and website messages, and Facebook Custom-made Audience management are all “Pro” features – Active Campaign View My Sent Emails.

Contrast with ConvertKit‘s Automations, which are more restricted. On ConvertKit, you can trigger an automation when: The contact submits a kind The contact purchases A tag is contributed to the contact A custom-made field is upgraded with a certain worth From there, you can produce Conditions, to inspect whether the contact has a particular tag or custom-made field worth.

Active Campaign View My Sent Emails

You can likewise produce Events, which are a bit like ActiveCampaign’s Goals, but without the reporting. You can track an Occasion when: A tag is added or removed The contact makes a purchase A date takes place A custom field is updated with a certain value You don’t develop e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The main method I build my list is through an e-mail course. ActiveCampaign makes it easy for me to construct my e-mail course exactly how I want to develop it. Numerous marketers build very basic email series for their “e-mail courses.” A contact indications up, and after that that contact immediately starts getting lessons.

It was easy to build with ActiveCampaign, however difficult when I was with MailChimp. I do not do that technique. My email course is manually synced with this countdown timer on my website. You have to sign up by Friday night, and a new course starts each Monday early morning. When I initially attempted this approach, I was on MailChimp.

Active Campaign View My Sent Emails

Here’s the automation I use to invite brand-new students to my Design Pitfalls course. There’s a couple of things going on here: The automation sends all contacts a “welcome e-mail (Active Campaign View My Sent Emails).” The automation validates that it’s not Friday. If it’s not Friday, the automation waits until it is Friday. At 11am, it sends a “pump up” email to get the students ready for next week’s course, and motivate them to share it with good friends.

The contact will begin getting lessons the following Monday morning. If it is Friday and after 7pm, the contact missed registration for next week’s class. They’ll get the pump up email the following Friday morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I do not wish to send out the very same e-mail to every individual on my list. I wish to send them the proper email for their level of engagement – Active Campaign View My Sent Emails. Active Campaign View My Sent Emails. Here’s the automation I utilize to promote an evergreen webinar: First it confirms that they haven’t currently acquired the product I pitch in the webinar.

Active Campaign View My Sent Emails

Then it sends out a series of emails to get them interested in the webinar, and to encourage them to register. If they sign up, they instantly hit the “Goal” towards the end of the webinar, and the automation ends. If they don’t register, they get contributed to an automation promoting a rebroadcast of the webinar. Active Campaign View My Sent Emails.

This enables me to customize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam combination panel: I can include tags based upon whether the contact registered, participated in, missed, or based upon for how long they stayed in the webinar. These tags can then activate automations within ActiveCampaign.

It costs me money, and it makes it more likely that my e-mails go to spam or Gmail’s promotions tab. Individuals who do not open my emails make it harder for other e-mails to get to the people who truly want them! The “Pro” strategy of ActiveCampaign has lead scoring built in.

Active Campaign View My Sent Emails

Here’s an automation I obtained from ActiveCampaign’s library of automations, which I use to tell which contacts aren’t engaging with my emails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it includes brand-new tags for 7 days, 30 days, 60 days, etc Each time they open an email, a different automation eliminates them from this automation, gets rid of all of those tags, and starts this automation over again.

This automation can be overwhelming in the beginning, and this is one of those cases where I wish ActiveCampaign had a more out-of-the-box solution. But, due to the fact that you can do anything with ActiveCampaign, often you need to develop things from scratch. ActiveCampaign has a choice to erase non-active customers, which I don’t advise.

Some customers don’t have tracking turned on, so their opens aren’t tape-recorded. Others still want to be subscribed however have been hectic. Here’s my reactivation sequence: I send out one email asking if they still desire to be subscribed, and briefly describing why I keep my email list tidy. In one week, I send them another email (if they currently clicked the verification link in the previous email, they’ve currently been gotten rid of from the automation using a separate automation) – Active Campaign View My Sent Emails.

Active Campaign View My Sent Emails

Active Campaign View My Sent EmailsActive Campaign View My Sent Emails

The automation then unsubscribes them. My e-mails also have a link to a type where they can enter their e-mail address to let me know that they don’t have tracking made it possible for. This type adds a tag that I utilize to filter those contacts out. Active Campaign View My Sent Emails. I utilized to add this tag when they clicked a link, but when individuals don’t have tracking on, it makes those links not work so reliably! I just send out an easy “do you still want my emails?” verification.

Active Campaign View My Sent Emails

Active Campaign View My Sent Emails

Active Campaign View My Sent EmailsActive Campaign View My Sent Emails

To begin developing an automation in ActiveCampaign, start with a “trigger.” There are a variety of methods you can activate an automation, including: When a tag is added When a contact signs up for a list When a contact sends a form E-commerce and on-site choices (available in the “Pro” strategy) When the contact reaches a particular point in another automation.

From there, you can start developing the actions in your automation. Some actions that are readily available in ActiveCampaign’s automations are: Send out an email Alert a team member Wait conditions If/then conditionals Split traffic for screening Skip to other parts of the automation Track goals (The contact can skip to the goal’s location in the automation.) Start or end another automation, or end the existing automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact information Include and eliminate tags Add a note Lead scoring, SMS and site messages, and Facebook Custom-made Audience management are all “Pro” features – Active Campaign View My Sent Emails.

Contrast with ConvertKit‘s Automations, which are more minimal. On ConvertKit, you can set off an automation when: The contact sends a form The contact buys A tag is contributed to the contact A custom-made field is upgraded with a particular value From there, you can create Conditions, to examine whether the contact has a specific tag or custom field worth.

Active Campaign View My Sent Emails

You can likewise create Occasions, which are a bit like ActiveCampaign’s Goals, but without the reporting. You can track an Occasion when: A tag is included or removed The contact buys A date takes place A custom field is updated with a particular value You do not create emails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign contrast. The main method I develop my list is through an e-mail course. ActiveCampaign makes it easy for me to develop my email course exactly how I want to build it. Lots of online marketers build extremely basic e-mail series for their “e-mail courses.” A contact signs up, and then that contact instantly begins getting lessons.

It was easy to develop with ActiveCampaign, however difficult when I was with MailChimp. I don’t do that approach. My e-mail course is manually synced with this countdown timer on my site. You need to register by Friday night, and a brand-new course begins each Monday early morning. When I initially tried this approach, I was on MailChimp.

Active Campaign View My Sent Emails

Here’s the automation I utilize to welcome new students to my Design Pitfalls course. There’s a few things going on here: The automation sends out all contacts a “welcome e-mail (Active Campaign View My Sent Emails).” The automation verifies that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends out a “pump up” email to get the trainees all set for next week’s course, and motivate them to share it with friends.

The contact will start getting lessons the following Monday early morning. If it is Friday and after 7pm, the contact missed out on enrollment for next week’s class. They’ll get the pump up e-mail the following Friday early morning, and lessons the Monday after that. It was impossible for me to automate this with MailChimp.

When I run a webinar, I don’t want to send out the exact same email to everyone on my list. I want to send them the proper email for their level of engagement – Active Campaign View My Sent Emails. Active Campaign View My Sent Emails. Here’s the automation I utilize to promote an evergreen webinar: First it confirms that they haven’t currently bought the item I pitch in the webinar.

Active Campaign View My Sent Emails

Then it sends a series of e-mails to get them interested in the webinar, and to encourage them to register. If they sign up, they instantly hit the “Goal” towards completion of the webinar, and the automation ends. If they do not register, they get included to an automation promoting a rebroadcast of the webinar. Active Campaign View My Sent Emails.

This enables me to personalize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can add tags based upon whether the contact registered, participated in, missed, or based upon the length of time they remained in the webinar. These tags can then activate automations within ActiveCampaign.

It costs me money, and it makes it most likely that my e-mails go to spam or Gmail’s promotions tab. Individuals who do not open my emails make it harder for other e-mails to get to individuals who really want them! The “Pro” plan of ActiveCampaign has actually lead scoring developed in.

Active Campaign View My Sent Emails

Here’s an automation I got from ActiveCampaign’s library of automations, which I utilize to tell which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation includes a “0 days” tag. As time passes, it adds new tags for 7 days, thirty days, 60 days, etc Each time they open an email, a separate automation eliminates them from this automation, eliminates all of those tags, and begins this automation over again.

This automation can be overwhelming at first, and this is among those cases where I want ActiveCampaign had a more out-of-the-box service. However, because you can do anything with ActiveCampaign, sometimes you need to construct things from scratch. ActiveCampaign has an alternative to delete inactive customers, which I don’t advise.

Some subscribers don’t have actually tracking switched on, so their opens aren’t tape-recorded. Others still wish to be subscribed but have been hectic. Here’s my reactivation series: I send out one e-mail asking if they still want to be subscribed, and briefly describing why I keep my e-mail list tidy. In one week, I send them another e-mail (if they already clicked the verification link in the previous e-mail, they have actually already been gotten rid of from the automation using a different automation) – Active Campaign View My Sent Emails.

Active Campaign View My Sent Emails

Active Campaign View My Sent EmailsActive Campaign View My Sent Emails

The automation then unsubscribes them. My emails likewise have a link to a kind where they can enter their e-mail address to let me know that they don’t have tracking allowed. This form adds a tag that I use to filter those contacts out. Active Campaign View My Sent Emails. I utilized to add this tag when they clicked on a link, however when individuals do not have tracking on, it makes those links not work so reliably! I only send out a basic “do you still desire my e-mails?” confirmation.