Add Countdown Timer To Active Campaign Emails

Add Countdown Timer To Active Campaign Emails

Add Countdown Timer To Active Campaign EmailsAdd Countdown Timer To Active Campaign Emails

To start building an automation in ActiveCampaign, begin with a “trigger.” There are a variety of methods you can activate an automation, including: When a tag is included When a contact signs up for a list When a contact sends a type E-commerce and on-site choices (available in the “Pro” plan) When the contact reaches a specific point in another automation.

From there, you can begin building the actions in your automation. Some actions that are offered in ActiveCampaign’s automations are: Send an email Notify a team member Wait conditions If/then conditionals Split traffic for testing Skip to other parts of the automation Track goals (The contact can skip to the goal’s place in the automation.) Start or end another automation, or end the current automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact details Add and eliminate tags Include a note Lead scoring, SMS and site messages, and Facebook Customized Audience management are all “Pro” features – Add Countdown Timer To Active Campaign Emails.

Contrast with ConvertKit‘s Automations, which are more restricted. On ConvertKit, you can set off an automation when: The contact sends a kind The contact purchases A tag is included to the contact A custom-made field is updated with a particular worth From there, you can create Conditions, to check whether the contact has a particular tag or custom-made field worth.

Add Countdown Timer To Active Campaign Emails

You can likewise produce Occasions, which are a bit like ActiveCampaign’s Objectives, but without the reporting. You can track an Event when: A tag is added or removed The contact makes a purchase A date takes place A customized field is updated with a particular worth You do not produce e-mails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign comparison. The main method I construct my list is through an email course. ActiveCampaign makes it simple for me to construct my e-mail course precisely how I wish to build it. Lots of marketers develop extremely basic email series for their “e-mail courses.” A contact signs up, and after that that contact instantly starts getting lessons.

It was simple to construct with ActiveCampaign, but difficult when I was with MailChimp. I do not do that approach. My e-mail course is by hand synced with this countdown timer on my website. You have to register by Friday night, and a brand-new course starts each Monday morning. When I first tried this approach, I was on MailChimp.

Add Countdown Timer To Active Campaign Emails

Here’s the automation I utilize to invite brand-new trainees to my Design Pitfalls course. There’s a couple of things going on here: The automation sends out all contacts a “welcome e-mail (Add Countdown Timer To Active Campaign Emails).” The automation verifies that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends a “pump up” e-mail to get the trainees prepared for next week’s course, and motivate them to share it with friends.

The contact will start getting lessons the following Monday early morning. If it is Friday and after 7pm, the contact missed out on enrollment for next week’s class. They’ll get the pump up e-mail the following Friday early morning, and lessons the Monday after that. It was difficult for me to automate this with MailChimp.

When I run a webinar, I don’t want to send out the very same email to every person on my list. I wish to send them the appropriate email for their level of engagement – Add Countdown Timer To Active Campaign Emails. Add Countdown Timer To Active Campaign Emails. Here’s the automation I use to promote an evergreen webinar: First it verifies that they haven’t already purchased the product I pitch in the webinar.

Add Countdown Timer To Active Campaign Emails

Then it sends out a series of emails to get them interested in the webinar, and to encourage them to register. If they register, they immediately hit the “Objective” toward the end of the webinar, and the automation ends. If they do not sign up, they get contributed to an automation promoting a rebroadcast of the webinar. Add Countdown Timer To Active Campaign Emails.

This allows me to customize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam combination panel: I can add tags based upon whether the contact signed up, participated in, missed, or based upon the length of time they stayed in the webinar. These tags can then set off automations within ActiveCampaign.

It costs me cash, and it makes it more most likely that my emails go to spam or Gmail’s promos tab. People who don’t open my emails make it harder for other emails to get to individuals who really want them! The “Pro” plan of ActiveCampaign has actually lead scoring constructed in.

Add Countdown Timer To Active Campaign Emails

Here’s an automation I got from ActiveCampaign’s library of automations, which I utilize to inform which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds new tags for 7 days, 1 month, 60 days, etc Each time they open an e-mail, a separate automation removes them from this automation, removes all of those tags, and begins this automation over once again.

This automation can be frustrating initially, and this is one of those cases where I want ActiveCampaign had a more out-of-the-box option. But, since you can do anything with ActiveCampaign, often you have to construct things from scratch. ActiveCampaign has an alternative to delete non-active customers, which I don’t suggest.

Some customers do not have actually tracking turned on, so their opens aren’t tape-recorded. Others still desire to be subscribed however have actually been busy. Here’s my reactivation sequence: I send out one e-mail asking if they still wish to be subscribed, and briefly discussing why I keep my email list tidy. In one week, I send them another email (if they already clicked the confirmation link in the previous email, they have actually already been removed from the automation using a different automation) – Add Countdown Timer To Active Campaign Emails.

Add Countdown Timer To Active Campaign Emails

Add Countdown Timer To Active Campaign EmailsAdd Countdown Timer To Active Campaign Emails

The automation then unsubscribes them. My emails likewise have a link to a type where they can enter their e-mail address to let me understand that they don’t have tracking enabled. This form adds a tag that I utilize to filter those contacts out. Add Countdown Timer To Active Campaign Emails. I used to add this tag when they clicked on a link, however when individuals do not have tracking on, it makes those links not work so reliably! I just send out an easy “do you still desire my emails?” verification.

Add Countdown Timer To Active Campaign Emails

Add Countdown Timer To Active Campaign Emails

Add Countdown Timer To Active Campaign EmailsAdd Countdown Timer To Active Campaign Emails

To begin constructing an automation in ActiveCampaign, begin with a “trigger.” There are a number of ways you can trigger an automation, consisting of: When a tag is added When a contact subscribes to a list When a contact sends a type E-commerce and on-site alternatives (available in the “Pro” plan) When the contact reaches a specific point in another automation.

From there, you can start developing the actions in your automation. Some actions that are readily available in ActiveCampaign’s automations are: Send out an e-mail Inform a team member Wait conditions If/then conditionals Split traffic for screening Skip to other parts of the automation Track objectives (The contact can avoid to the objective’s place in the automation.) Start or end another automation, or end the existing automation Post a webhook Subscribe or unsubscribe the contact to/from lists Update contact details Add and remove tags Include a note Lead scoring, SMS and website messages, and Facebook Custom Audience management are all “Pro” features – Add Countdown Timer To Active Campaign Emails.

Contrast with ConvertKit‘s Automations, which are more restricted. On ConvertKit, you can activate an automation when: The contact sends a form The contact purchases A tag is contributed to the contact A custom-made field is updated with a specific value From there, you can create Conditions, to check whether the contact has a certain tag or custom-made field worth.

Add Countdown Timer To Active Campaign Emails

You can likewise create Occasions, which are a bit like ActiveCampaign’s Goals, but without the reporting. You can track an Event when: A tag is included or gotten rid of The contact purchases A date happens A custom field is upgraded with a certain worth You do not produce emails in ConvertKit’s Automations.

For more on how ActiveCampaign compares to ConvertKit, read my ConvertKit vs ActiveCampaign contrast. The primary method I construct my list is through an e-mail course. ActiveCampaign makes it simple for me to develop my e-mail course precisely how I want to develop it. Many marketers build extremely easy email sequences for their “email courses.” A contact register, and after that that contact instantly starts getting lessons.

It was simple to build with ActiveCampaign, but difficult when I was with MailChimp. I don’t do that approach. My e-mail course is by hand synced with this countdown timer on my site. You have to sign up by Friday night, and a new course begins each Monday morning. When I initially tried this approach, I was on MailChimp.

Add Countdown Timer To Active Campaign Emails

Here’s the automation I use to welcome new students to my Design Pitfalls course. There’s a couple of things going on here: The automation sends all contacts a “welcome email (Add Countdown Timer To Active Campaign Emails).” The automation validates that it’s not Friday. If it’s not Friday, the automation waits till it is Friday. At 11am, it sends a “pump up” e-mail to get the students all set for next week’s course, and encourage them to share it with good friends.

The contact will start getting lessons the following Monday morning. If it is Friday and after 7pm, the contact missed out on registration for next week’s class. They’ll get the pump up e-mail the following Friday morning, and lessons the Monday after that. It was impossible for me to automate this with MailChimp.

When I run a webinar, I do not want to send out the very same email to everyone on my list. I wish to send them the appropriate e-mail for their level of engagement – Add Countdown Timer To Active Campaign Emails. Add Countdown Timer To Active Campaign Emails. Here’s the automation I utilize to promote an evergreen webinar: First it verifies that they haven’t currently bought the product I pitch in the webinar.

Add Countdown Timer To Active Campaign Emails

Then it sends a series of e-mails to get them interested in the webinar, and to motivate them to register. If they register, they right away hit the “Goal” towards completion of the webinar, and the automation ends. If they do not register, they get contributed to an automation promoting a rebroadcast of the webinar. Add Countdown Timer To Active Campaign Emails.

This enables me to customize my messaging, in other automations, based upon the contact’s engagement with the webinar. Here’s the WebinarJam integration panel: I can include tags based upon whether the contact signed up, attended, missed, or based upon the length of time they remained in the webinar. These tags can then trigger automations within ActiveCampaign.

It costs me money, and it makes it most likely that my emails go to spam or Gmail’s promotions tab. Individuals who don’t open my e-mails make it harder for other emails to get to the individuals who really want them! The “Pro” strategy of ActiveCampaign has lead scoring constructed in.

Add Countdown Timer To Active Campaign Emails

Here’s an automation I obtained from ActiveCampaign’s library of automations, which I use to tell which contacts aren’t engaging with my e-mails. When a contact subscribes, this automation adds a “0 days” tag. As time passes, it adds new tags for 7 days, 30 days, 60 days, etc Each time they open an email, a separate automation removes them from this automation, removes all of those tags, and begins this automation over once again.

This automation can be overwhelming at initially, and this is one of those cases where I want ActiveCampaign had a more out-of-the-box option. But, due to the fact that you can do anything with ActiveCampaign, in some cases you have to build things from scratch. ActiveCampaign has a choice to erase non-active subscribers, which I don’t advise.

Some customers don’t have actually tracking switched on, so their opens aren’t tape-recorded. Others still wish to be subscribed but have been busy. Here’s my reactivation sequence: I send one e-mail asking if they still wish to be subscribed, and briefly explaining why I keep my e-mail list tidy. In one week, I send them another e-mail (if they currently clicked the confirmation link in the previous e-mail, they’ve currently been removed from the automation utilizing a different automation) – Add Countdown Timer To Active Campaign Emails.

Add Countdown Timer To Active Campaign Emails

Add Countdown Timer To Active Campaign EmailsAdd Countdown Timer To Active Campaign Emails

The automation then unsubscribes them. My e-mails also have a link to a form where they can enter their e-mail address to let me know that they do not have tracking enabled. This type includes a tag that I utilize to filter those contacts out. Add Countdown Timer To Active Campaign Emails. I used to include this tag when they clicked on a link, but when individuals don’t have tracking on, it makes those links not work so dependably! I only send out a basic “do you still desire my emails?” confirmation.